NiteSafe Duo LED Night Light Or Motion Sensor With Torch & Power Failure Light

The Duo is our entry-level model that offers simple-to-use functionality suitable for many situations.

This model offers either Motion Sensor or Dusk Till Dawn mode. You can choose which mode to use by pushing the side switch all the way up or all the way down.

When the Duo is in the plug-in cradle, push the side switch down to enable Motion Sensor mode. In this mode, the front LEDs automatically turn on when motion is detected in low or dark light. The light stays on for around 20 seconds and turns off until motion is detected again.

To use Dusk Till Dawn mode, push the side switch all the way up. In this mode, the front LEDs automatically turn on and remain on during dusk, darkness, or low light conditions.

To turn the torch off completely, with no light functions or power failure mode, push the side switch to the middle. This disables the unit entirely.

The top LEDs automatically turn on when power is no longer detected or the wall socket is switched off. In power failure mode, the torch charge lasts approximately 2 hours.

You can remove the torch from the cradle at any time to use as a handheld torch. The top LEDs will remain on until the torch runs out of charge.

This product is intended to remain in the plug-in cradle for the majority of the time. Power cut detection only works when the torch has charge and is correctly seated in the cradle with the socket switched on.

Please note the night light feature activates whenever the torch detects that ambient light levels are lower than natural daylight. This can be caused by shadows, objects partially covering the unit, or the time of day, depending on where the torch is plugged in.

The torch does not use time-based or “smart” technology to determine day or night; it responds purely to light levels and switches on when dusk-type lighting conditions are detected.

There is no way to manually control or override this feature. To prevent the night light from activating during the day, ensure the torch is plugged into a location with consistent daylight.

Please note the night light and/or motion sensor features cannot be turned off with this model. If you are looking for a power failure only light, we recommend our Xtralite NiteSafe Maxi model, which can be switched off on the unit itself but will still light up during a power cut. For more information, see our FAQs page.